Polyurethane Technical Articles
Clear technical explanations of polyurethane systems, raw materials, foam types and the factors that influence manufacturer system selection.
What Is Polyurethane Foam?
A practical introduction to polyurethane foam: how polyol and isocyanate react, why different systems behave differently, and where they are used.
Read article → System ComparisonRigid vs Flexible Polyurethane Systems
A high-level comparison of rigid, flexible, visco, integral, spray and auxiliary systems, and which factors influence the right choice.
Read article → Industry FocusPolyurethane Systems for Cold Room Panels
Why polyurethane is the dominant material in cold room panel production, and which selection factors matter for panel manufacturers.
Read article → BasicsPolyol & Isocyanate: Basic Explanation for Manufacturers
An overview of the two core polyurethane raw materials and why their balance defines the behavior of every PU system.
Read article → RecyclingPolyurethane Recycling Methods
Glycolysis, aminolysis, acidolysis and hydrolysis: chemical recycling routes for polyurethane and where each one stands industrially.
Read article → Insulation · PanelsPIR vs PUR Insulation Panels
Polyisocyanurate vs rigid polyurethane: chemistry, thermal performance, fire behavior and which to specify for which application.
Read article → Industry & SupplyWhat Is a Polyurethane System House?
How polyurethane systems reach the production line: what a system house does that raw material producers and distributors don't, and why the role matters to manufacturers.
Read article → Flexible FoamHow to Select Flexible Polyurethane Foam
Density, hardness, compression set and fire class: the parameters that drive the right specification for furniture, mattress, automotive and packaging foam.
Read article → ManufacturingHow Cold Room Sandwich Panels Are Manufactured
Continuous lamination vs discontinuous press, the step-by-step panel line, and the process parameters that govern panel quality and EN 14509 compliance.
Read article → Auxiliary ChemicalsMold Release Agents for Polyurethane
Solvent-based, water-based, semi-permanent and internal release agents: chemistry, selection by application and the regulatory direction.
Read article → Decorative PUPolyurethane for Decoration & Cornices
The rigid PU system behind cornices, ceiling medallions and architectural profiles, and why polyurethane displaced plaster and wood in the segment.
Read article → Insulation · PanelsHow to Choose a Polyurethane System for Sandwich Panels
A checklist for panel makers: line type, thickness, facings, fire class, blowing agent, storage in hot climates, volume and what to send for a quote.
Read article → Spray SystemsSpray Foam or Polyurea?
Spray foam insulates, polyurea waterproofs. Where each fits on roofs, facades, cold stores, tanks and foundations, and when contractors use both.
Read article → Industry and SupplyBuying Polyurethane Systems from Türkiye
What to send for a quote, how systems are packed and paid for, which documents usually travel with them, and how to store, trial and reorder.
Read article →Need a specific technical answer?
Our technical team can answer formulation, application and process-condition questions specific to your production setup.