Refrigerator polyurethane systems are two-component rigid systems, a polyol blend and an isocyanate, that are injected into the cavity, expand and cure into rigid insulating foam. We also have systems for industrial coolers, water heaters, hot-water tanks and solar collectors. We formulate all of them in Bursa, Türkiye, and adapt each one to your product and your line.
In a refrigerator or an industrial cooler, the insulation is foamed in place. The two components of a rigid polyurethane system, a polyol blend and an isocyanate, are mixed and injected into the cavity between the inner and outer walls, where the foam expands, flows through the space and cures into rigid insulating foam that also bonds the walls together. Our refrigerator systems were developed first for this job. They bond well to the facings and fill the cavity evenly, without voids, at insulation thicknesses from 4 to 20 cm. That matters, because a void left in the wall is a gap in the insulation.
The same refrigerator systems are also used to make cold room and truck-body panels, and our cold-room panel systems are in turn used in industrial coolers and refrigerators. For solar collectors and hot-water tanks, including water-heater tanks, we have separate polyurethane systems. Across all of these insulation systems, the blowing agents are ozone-friendly, from the n-pentane, HFC and HFO families, and none contain HCFC-141b. We agree the blowing agent with you so that it suits your plant's equipment and the regulations in your market.
Choosing a polyurethane system for refrigerator or water-heater insulation starts from your appliance and your line, not from a catalogue. For appliances, the cavity shape and the way the foam is injected or poured decide the choice. From there we adapt one of our own formulations to your product and your line, drawing on more than 700 existing formulations. If your process uses moulds that need a release agent, we make our own, water-based and solvent-based. For suitable projects, our technical team can visit your line and run production trials with you.
Every system has two components. Component A is the JiTPOL polyol blend, made from high-functionality polyols, catalysts and stabilisers and adapted to your line. Component B is a high-functionality polymeric MDI; the data sheet for your system names the grade to use. The systems are packed in 200 kg metal drums and 1000 kg IBC tanks and shipped from Bursa, Türkiye. We export to more than 30 countries, including Syria, Iraq, the Gulf and Central Asia.
For refrigerators and industrial coolers we recommend our refrigerator systems. They were developed first for this job: injected into the cavity, they bond well to the facings and fill the space evenly without voids, at insulation thicknesses from 4 to 20 cm. In the quote form, describe the cavity shape, the thickness and how the foam goes in, and we will propose a system adapted to your line.
A system has two components: a polyol blend (component A) and an isocyanate (component B). They are mixed in a foaming machine and injected into the cavity between the inner and outer walls of the appliance. The foam expands, fills the space and cures into rigid insulation that also bonds the walls together. State your foaming method, injection or pouring, in the quote form.
Yes. We have separate systems for solar collectors and for hot-water tanks, including water-heater tanks. As with refrigerators, the cavity shape and the way the foam is injected or poured decide which system fits. In the quote form, tell us what you make, the insulation thickness and your foaming equipment.
Ozone-friendly blowing agents from the n-pentane, HFC and HFO families; none of our insulation systems contain HCFC-141b. We agree the blowing agent with you so that it suits your plant's equipment and the regulations in the markets you sell into. When you ask for a quote, tell us which blowing agent your line runs on today.
Often, yes. Our refrigerator systems are also used for cold room and truck-body panels, and our cold-room panel systems are also used in industrial coolers and refrigerators. Each group was developed first for its main product, so we recommend the one built for what you make most. If your plant makes both appliances and panels, describe both lines in your quote request.
For refrigerator and industrial cooler walls, our systems cover insulation thicknesses from 4 to 20 cm. They bond well to the facings and fill the cavity evenly, without voids. The thickness you need follows from your product design. We adapt the system to that thickness, your foaming method and your line, so give the cavity shape and the thickness in the quote form.
We develop and supply our insulation systems from Bursa, Türkiye. Each system comes as two components: a JiTPOL polyol blend (component A) and a polymeric MDI (component B), packed in 200 kg metal drums and 1000 kg IBC tanks. In your quote request, give the destination country and the expected monthly volume.
No, we do not publish data sheets for download. We send them on request through the quote form, for the system matched to your product. The data sheet also names the MDI grade to use with the system. Describe your appliance, your line and your monthly volume there; our team replies to quote requests within 24 hours.
Tell us about your project. Our team will respond within 24 hours.
Thank you. Our team will review your requirements and get back to you within 24 hours.